InformationTitleCalibrationsContentContentCalibrations are used to record before and after readings while doing work. Calibrations can be created from the Calibrations page. Creating New Calibrations To create a new Calibration do the following: Select Work.Select Calibrations.Select New.Enter Calibration ID and Description if necessary.Add new Values using the green plus symbol.Repeat Step 5 as necessary.Select Save. How to Fill Out a Calibration Record General Calibration: This field determines the name of the Calibration record. Description: This field is used to provide additional details about the Calibration. Add New Standard: This field represents the value or measurement device deemed "Standard" for this Calibration. This can be determined by national or international standards (e.g. NIST) UOM: This field will determine the Calibration Unit used for this Calibration. This links to the Calibration Units list. Min: The lowest acceptable value or limit for this Calibration. Normal: The expected value for this Calibration under standard conditions. This can also be the midpoint between the Min and Max. Max: The highest acceptable value or limit for this Calibration. Calibrate Action Using Action> Calibrate from the Calibrations page will allow you to create a new Calibration reading for the selected Calibration record. Click to Zoom URL NameCalibrations